Introduction to Frequency Specific Microcurrent (2024)

What is the goal of Frequency Specific Microcurrent?

Our goal is to treat every patient in pain who wants to be helped by training practitioners who can treat them. And to teach, research, publish and promote FSM in such a way that it survives and thrives.

Why this technology?

I work with FSM because it brings relief to so many patients for so many conditions. It is low risk, non-invasive and incredibly effective. Every practice that uses FSM sees an increase in patient flow as one patient who has been helped refers another. Patients who return to their referring doctor with dramatic improvements often generate referrals of new patients from that provider to the FSM practitioner. Chronic patients are helped and move on to infrequent care leaving room for new patients. Almost every practice that has used FSM sees an increase in practice income because of these patient and professional referrals. I started teaching FSM to see if it was reproducible. I keep teaching FSM because it would be immoral not to. Every day FSM creates effects and provides relief that is simply not possible with any other modality or any other known treatment. Every day FSM practitioners report results produced with FSM to change patient’s lives. It is an awesome experience.

The personal reward and satisfaction of using a modality that can provide such profound relief make FSM practitioners a passionate and happy group. As a group FSM practitioners need to be brighter than the average clinician because the diagnosis has to be correct. As a group, they tend to see more and more complicated patients because they can help. As a group, need to have a practice model that allows for 20 to 40-minute appointment slots. FSM is not suited to a 5-minute chiropractic model or a 7-minute medical model. The practitioner can use clinical assistants to provide the care once the diagnosis and treatment plan have been created by the trained clinician.

FSM started with an observation of a clinical effect. It has continued to prove these effects to be consistent, reproducible, measurable and predictable. FSM practitioners love having a tool that allows them to help patients. You work with FSM because you love it.

How does Frequency Specific Microcurrent (FSM) work?

Frequencies are pulses per second measured in hertz. They can be sound waves or electronic pulses. The frequencies used in FSM are electromagnetic pulses used on two channels firing at the same time. The frequencies are delivered using a ramped square wave that includes high frequency harmonics to create the square wave. This makes the frequencies more accurately pulses rather than the pure frequencies achieved with a sine wave generator. Most microcurrent devices use square wave pulses because they have been observed to be more effective clinically.

The frequency thought to address or neutralize the condition is put on channel A. The frequency thought to address the tissue is put on channel B. The frequencies used in FSM are all less than 1000 Hz. There are frequencies from the list alleged to address over 200 conditions from very common conditions like inflammation, scar tissue, mineral deposits, and toxicity to very unusual and hard to document conditions like polio virus, trauma, and congestion. There can be no claims made for the effects of the frequencies until research has documented their effects. All that can be said is that use of this or that frequency had this observed effect in this patient with a certain condition.

There are a few frequencies that are used as A/B pairs. A is not a condition, B is not a tissue but the combination of the two frequencies appears to have a therapeutic effect. There is one such frequency combination that takes away shingles pain. When this combination is used before the blisters break out for an hour a day for three days the pain is gone in 20 minutes and the blisters never break out. When this combination is used for two hours on active shingles, after the blisters appear, it eliminates the pain and shortens the course from the normal six weeks to four to five days. The pain never returns. Shingles is the only thing this frequency combination is good for and, so far, there has not been a patient who did not respond in an expected way.

Dr. McMakin didn’t develop the frequencies. The frequencies were developed between 1910 and 1934 by medical and osteopathic physicians using an entirely different machine and system of treatment. The frequencies are used clinically; the effects are documented in chart notes and serve as a basis for the development of protocols that appear to be effective for different clinical conditions. The protocols are taught during FSM seminars and then it is determined if the effects are reproducible based on feedback from practitioners. There are four peer-reviewed published papers documenting the effects in the treatment of myofascial pain from trigger points, neuropathic pain from fibromyalgia associated with spine trauma and delayed onset muscle soreness.

What is microcurrent?

Microcurrent is current in millionths of an ampere. An ampere is a measure of the movement of electrons past a point. Microamperage current is the same kind of current your body produces on its own within each cell. This is current in millionths of an amp. It is very small; there is not enough current to stimulate sensory nerves so the current flow cannot be felt. You can tell it is running by watching the conductance meter on the machine.

What is the difference between microcurrent and ultra sound?

Ultrasound creates ultrasonic vibrations and creates heat by vibrating the water molecules in the tissue. It does not provide current nor does it change ATP status. It provides beneficial results by these mechanisms but it is completely different than microcurrent.

What is the difference between microcurrent and TENS?

Microcurrent is approved in the category of TENS devices by the FDA. TENS devices deliver milliamp current and block pain messages that are tying to get up the spine to the brain. Microcurrent delivers subsensory microamperage current, 1000 times less than milli-amperage current, which has been shown in published studies to increase ATP production in tissues.

Is there anyone who does not benefit from FSM?

Patients who are dehydrated cannot benefit from FSM. Athletes with large muscle mass and inadequate water intake and patients over 70 who are chronically dehydrated have the most problems. Every patient is advised to drink at least one quart of water in the one hour preceding treatment. Patients who are chronically dehydrated may need more water over several days prior to their treatments.

No technique is 100% effective and FSM is no exception. The effectiveness of FSM depends almost entirely on an accurate diagnosis. Shoulder pain can come from muscles, tendons, bursa, discs, nerves or joints. FSM will treat all of these pain generators effectively. But, if you are treating for muscle and the shoulder pain is from nerves or the bursa you may change the muscle but you won’t change the patient’s pain since it is not coming from the muscle. This analogy applies to every condition.

Are there any risks or dangers to the practitioner or the patient?

Dr. McMakin has been using FSM since 1994 and various practitioners have been using it since 1997. There have been no permanent adverse effects attributable to the use of the microcurrent units or to the use of the frequencies. There are two effects to be considered – the effect of the current and the effect of the frequencies. The practitioner is protected from the current by wearing latex gloves and is therefore not affected by the current. The practitioner is in the field created by the frequencies and the resonance effect experienced by the patient. This field can be perceived by some practitioners and is either pleasant or bothersome depending on the practitioner’s ability to process the sensations.

The sensation is usually perceived as being “light or floaty” and lasts only as long as the practitioner is using a frequency that is producing a positive effect on the patient. In every class, there is a bell-shaped curve of sensitivity to this sensation. 10% of the class will not feel anything at all in response to the frequencies. 10% of the class will feel a strong sensation of being “floaty or light headed” (not dizzy) or slightly “stoned.” The rest of the class will have perceptions someplace in between those two groups. Patients fall into roughly the same bell-shaped curve of sensitivity. The “floaty feeling” response occurs not as a result of any particular frequency but in response to any frequency that resonates with the patient’s condition.

There are no risks to the patient that we know about as long as the practitioner follows the proper contraindications and precautions associated with both FSM and the use of microcurrent. There are frequencies used to remove scar tissue that should not be used within six weeks of the time of a new injury. Sometimes when muscles are successfully treated the range of motion increases so much that joints and nerves can become temporarily painful until the range of motion goes back down. Practitioners are aware of these possible reactions and are advised to warn patients about them. After muscles are treated there is sometimes a detoxification reaction that occurs 90 minutes after treatment similar to that seen with massage therapy. This can be lessened by having the patient drink water and take an anti-oxidant combination supplement. The warnings and contraindications appropriate to TENS devices are taught as part of the practicum sessions and reinforced during the lecture.

Is there any Frequency Specific Microcurrent animal research?

The frequency thought to “reduce inflammation in the immune system” was studied in an animal research laboratory at University of Sydney in Australia by Dr. Vivienne Reeve. Arachadonic acid was painted on the ears of hairless mice. Arachadonic acid causes inflammation mediated by lipoxygenase prostaglandin pathways and causes swelling. This animal model is an accepted way to study inflammation and has been used to study virtually every anti-inflammatory drug or therapy.

The frequency combination reduced swelling by 62% in four minutes in every animal tested with everyone in the lab blinded and as tested against a placebo frequency. Prescription and non-prescription drugs tested in this animal model reduced swelling by 45%. Placebo frequency had no effect on swelling. None of the three other frequency combinations tested in this animal model reduced inflammation at all. The frequency response was time-dependent. 50% of the effect was present at two minutes, 100% of the effect was present at four minutes and further time spent on the frequency had no additional effect. This is the only frequency combination that has been studied in an animal model but the effects and the implications are important.

In an additional animal trial, myristeal stearate was painted on the mouse’s ears creating inflammation and swelling in a COX (cycloxygenase) mediated inflammatory pathway. The frequency to “reduce inflammation in the skin” had no effect on swelling at all. It was equivalent to placebo. The frequency combination thought to “reduce inflammation in the immune system” reduced COX mediated inflammation by 30% in a four-minute time-dependent response as compared to placebo. This reduction in swelling is equivalent to that created by the prescription injectable drug Toridol when it was tested in this animal model.

Sunburn creates swelling and inflammation. The mice were exposed to UV light sufficient to create sunburn and swelling. One group was not treated, one group was treated immediately and one group was treated at two hours after exposure. The untreated group had the expected swelling. The group treated immediately had a slight but not statistically significant reduction in swelling when measured at 21, 23, 25 and 27 hours after exposure. The group treated at two hours had a statistically significant reduction in swelling (p>.01).

One way of measuring immune system response is to expose it to a chemical to which it should normally develop an allergic reaction and then treat the system in some way and see if the immune response upon re-exposure is the same or different after the intervention. Sunburn suppresses immune system allergy responses. Mice exposed to a sensitizing chemical, oxazalone, normally swell by 30 units of measurement when re-exposed to the chemical two weeks after the first application. Mice that are sunburned but not treated swell only 11 units indicating an immune response suppression of 63.4%. Mice that were treated with FSM at two hours, with the best reduction in sunburn swelling, had 13 units of swelling upon second exposure to oxazalone indicating immune suppression of 57.48%. Mice that were treated immediately with FSM, who had only a slight reduction in burn swelling, had 21 units of swelling when re-exposed to oxazalone two weeks after the burn and FSM treatment. This represents a reduction of immune system suppression from 63.4% to 31.05%. Of all of the FSM human and animal data this is the most impressive and fascinating. A single four minute exposure to a frequency combination caused a permanent change in immune system function as measured two weeks after the treatment. This experiment has not been repeated but Dr. Reeve is the top in her field and certifies that the research was carried out to the highest laboratory standards of animal testing.

What is a frequency protocol and what does it do?

Frequency protocols are sequences of frequencies observed to have a certain clinical effect in various conditions as determined in Dr. McMakin’s practice and by input from other FSM practitioners. The sequences of frequencies are taught in the FSM seminars and the students are provided with a summary sheet of frequencies and the most common protocols for conditions found to be successfully treated. The most commonly effective and useful protocols have been pre-programmed into an automated microcurrent unit that sequences through frequencies automatically for unattended in office care. There are no claims made for the effectiveness of the frequency protocols. They are to be used so that the effects can be observed in clinical practice.

For example the question, “Does this frequency combination reduce inflammation in the liver?” the only truly honest answer is, “That has not been determined with certainty.” It can only be said that when these particular frequency combinations are applied to the right upper quadrant of the abdomen for a period of 30 to 60 minutes the liver becomes non-tender instead of tender and seriously elevated liver enzymes have been reduced into the normal range within hours instead of days or weeks. This phenomenon has been observed in multiple patients, treated by different physicians in different areas. It is now thought to be reproducible as demonstrated by objective measurement of liver enzymes. More study is required before any definite statement can be made.

What can frequencies treat?

The frequencies appear to change a variety of conditions and tissues and change pain and function in a large number of clinical conditions. FSM is especially effective at treating nerve and muscle pain, inflammation and scar tissue. There is a kind of fibromyalgia associated with spine trauma that is particularly painful and difficult to treat even with narcotics. There is one frequency combination, and only one frequency combination, that has been observed to eliminate pain in patients with this condition. Shingles responds very well to only one frequency combination that eliminates the pain in 20 minutes and causes the lesions to dry up and disappear in approximately two to three days. There is one frequency combination that so far has been 100% effective in eliminating kidney stone pain. This frequency combination does nothing to remove the stone; it only eliminates the pain. The frequencies have created observed effects in asthma, liver dysfunction (reducing elevated liver enzymes), irritable bowel and many other conditions. It has been observed that patients who are treated within four hours of a new injury including auto accidents and surgeries have much reduced pain and a greatly accelerated healing process.

Frequency Specific Seminars makes no claims about the use of frequencies in the diagnosis and treatment of any condition. The frequencies appear to have beneficial affects when used in a clinical setting as an adjunct to appropriate medical diagnosis and treatment. More research is needed to document specific effects.

There are no guarantees that any protocol is going to be effective in any given patient on any given condition. In general, the frequencies either work or don’t work and if they don’t work they simply have no effect. In the seminars, physicians are advised to use good judgment and use FSM as an adjunct to appropriate medical diagnosis and treatment. As long as appropriate proven therapies are not delayed or withheld, FSM can be very helpful. Every practitioner is trained in the concept that FSM is to be used as an adjunct to therapeutics appropriate to their discipline for the patient after proper diagnosis. The FSM motto is “Can’t hurt; might help.”

It is NOT recommended that the frequencies be used to treat cancer. The condition is too serious and too complicated to be addressed with this technique. Dr. Arlene Lennox of Fermi Labs in Chicago published a paper showing that patients treated for scar tissue following neutron therapy for cancer that still had active tumor during the microcurrent treatment with Acuscope device had no increase in tumor growth and actually tolerated radiation therapy with fewer side effects.

Is FSM scientific?

There can be no claims made for the diagnosis or treatment of any medical condition using frequencies. Science is a method of study not a body of information or a viewpoint. In any scientific endeavor an objective trained observer can make observations of effects. All science starts with observation of a phenomenon and then asks whether the phenomena can be measured and whether it is reproducible and predictable. The scientific method finally sets out to measure and observe the phenomena in a controlled fashion eliminating every other possibility for the observed effect besides the hypothesized mechanism being studied.

FSM is in the early stages of this process. The phenomena are physical changes in biological tissue observed to occur only in response to certain specific frequency combinations applied with a microcurrent device delivering square wave pulses on two channels simultaneously. There are certain frequencies that produce effects that can be objectively measured, that are reproducible by any trained practitioner treating the same condition in a hydrated patient and that are predictable. Controlled trials are planned to finally confirm the frequency specific response.

Is FSM FDA approved?

All class II microcurrent devices will have a 510k certificate allowing them to be marketed to physicians. The FDA does not approve devices for sale the way it approves drugs for sale. The 510K just means that it can be used in a medical setting and is substantially equivalent to other devices that have been marketed before it. FDA has approved all microcurrent devices for sale in the category of TENS devices. TENS devices are for pain control only and deliver milli-amperage current. ALL TENS devices carry the same warnings precautions and contraindications. Microcurrent devices deliver microamperage current not milliamperage current but the warnings for the device are same because all microcurrent devices are approved in the category of TENS devices.

The FDA regulates claims that can be made about therapies, drugs and devices. The claims made for the device can only be those claims that could be made for any device approved in that class of devices and what has been published in a peer reviewed journal regarding its use.

What is the history of FSM?

Microcurrent was first used in the 1980s by physicians in Europe and the US for stimulating bone repair in non-union fractures. There are numerous studies published on the effects of single channel microcurrent showing that it increases the rate of healing in wounds and fractures. There is one study showing that microamperage current between 10 and 500 micro amps increases ATP (cellular energy) production by 500% in rat skin. Current levels between 500 and 1000 micro amps caused energy production to level off. Current levels above 1000 micro amps caused ATP production to decline.

There are a number of devices on the market that can deliver microamperage current. All of the research and papers published on Frequency Specific Microcurrent (FSM) have been done using a device manufactured by Precision Microcurrent Inc. But any microcurrent device with two independent channels that provide three-digit specific frequencies such as 284 Hz (rather than 280 Hz) on each channel, using a ramped square wave and either polarized or alternating DC current can be used.

Frequency Specific Microcurrent (FSM) seminars teach frequency protocols and discuss the effects of frequencies and biological resonance on physical tissue based on clinical observations and research. FSM seminars are NOT about the use of microcurrent or microcurrent devices. FSM does not sell or promote devices. FSM teaches the principles and use of biologic resonance and frequencies.

For more information please go to Dr. McMakin's Frequency Specific Microcurrent website.

Introduction to Frequency Specific Microcurrent (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Fr. Dewey Fisher

Last Updated:

Views: 6371

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.